What One Needs To Know About Billiards Repair Denver

Publié par Unknown mardi 2 juin 2015

By Ericka Marsh


Billiards is one of the most popular past-times and it is not uncommon to find the game in most homes. Slate is one of the most used materials for billiards. It is a material that is attractive and resilient and produces one of the most durable outcomes. However, with time there is bound to be reduction in quality of the table because of wear and tear. When considering billiards repair Denver has various professionals who can do the job. However, it is important to be well acquainted with the repair process.

The wear and tear of the table is experienced through cracks in the slate below the felt. There are a number of tips that are useful when it comes to repair of billiards and restoring it back to its condition. Repairs are better attended to after separating the felt and the table. In so doing, the repairs will be done in a more comprehensive manner. A socket wrench will be required for this exercise. It is used to remove the bolts that attach the rails to the table.

After the rails are removed, the staples which attach the felt to the table are removed. A staple puller is the best tool for this though a screwdriver may also be used. The screwdriver should have a flat head. The staples that have been removed should be put aside carefully so that they are not misplaced. Besides, they are likely to cause injury if stepped upon.

The extent of the cracks is known through inspection of the slate. Beeswax will suffice to fill the fine cracks and small chips. It should be held above the crack, some 4 inches, as the wax is melted. The melting is done using a portable propane torch. The wax is left to drip into the cracks.

For it to bond effectively, slate requires enough wax. Therefore, there should be placement of enough wax into the cracks. After the wax gets cooled, any excesses are removed using a paint scraper. Excess wax ought to be removed because it will leave behind an unpleasant appearance. The right amounts should be placed so that the cracks are filled effectively.

Billiard table wax can also be used. It has resin that makes it to harden much better than beeswax. This gives more durable results. Billiard wax is better in the event that the cracks are considerably big. Like in the case of beeswax, there will be excess wax that should be gotten rid of. After removing the excesses, it is important to wipe the slate with damp cloth or sponge. Billiard wax also comes in handy when you have to seal loose seams on slate.

If the cracks are more extensive, the best option to use will be slate repair glue. This has thick consistency that helps to effectively bond the slate. This is applied inside the crack on both sides. The two separate sides of the slate are pushed together firmly. They are held together for a while so that the glue bonds the separate pieces of slate.

The pressure that results from the slate being pushed together makes some glue to seep out. It ought to be left to dry. After that, it is smoothed using sandpaper. The felt is put back in position after all repairs are done.




About the Author:



0 commentaires

Enregistrer un commentaire

mardi 2 juin 2015

What One Needs To Know About Billiards Repair Denver

Posted by Unknown 03:23, under | No comments

By Ericka Marsh


Billiards is one of the most popular past-times and it is not uncommon to find the game in most homes. Slate is one of the most used materials for billiards. It is a material that is attractive and resilient and produces one of the most durable outcomes. However, with time there is bound to be reduction in quality of the table because of wear and tear. When considering billiards repair Denver has various professionals who can do the job. However, it is important to be well acquainted with the repair process.

The wear and tear of the table is experienced through cracks in the slate below the felt. There are a number of tips that are useful when it comes to repair of billiards and restoring it back to its condition. Repairs are better attended to after separating the felt and the table. In so doing, the repairs will be done in a more comprehensive manner. A socket wrench will be required for this exercise. It is used to remove the bolts that attach the rails to the table.

After the rails are removed, the staples which attach the felt to the table are removed. A staple puller is the best tool for this though a screwdriver may also be used. The screwdriver should have a flat head. The staples that have been removed should be put aside carefully so that they are not misplaced. Besides, they are likely to cause injury if stepped upon.

The extent of the cracks is known through inspection of the slate. Beeswax will suffice to fill the fine cracks and small chips. It should be held above the crack, some 4 inches, as the wax is melted. The melting is done using a portable propane torch. The wax is left to drip into the cracks.

For it to bond effectively, slate requires enough wax. Therefore, there should be placement of enough wax into the cracks. After the wax gets cooled, any excesses are removed using a paint scraper. Excess wax ought to be removed because it will leave behind an unpleasant appearance. The right amounts should be placed so that the cracks are filled effectively.

Billiard table wax can also be used. It has resin that makes it to harden much better than beeswax. This gives more durable results. Billiard wax is better in the event that the cracks are considerably big. Like in the case of beeswax, there will be excess wax that should be gotten rid of. After removing the excesses, it is important to wipe the slate with damp cloth or sponge. Billiard wax also comes in handy when you have to seal loose seams on slate.

If the cracks are more extensive, the best option to use will be slate repair glue. This has thick consistency that helps to effectively bond the slate. This is applied inside the crack on both sides. The two separate sides of the slate are pushed together firmly. They are held together for a while so that the glue bonds the separate pieces of slate.

The pressure that results from the slate being pushed together makes some glue to seep out. It ought to be left to dry. After that, it is smoothed using sandpaper. The felt is put back in position after all repairs are done.




About the Author:



0 commentaires:

Enregistrer un commentaire

Tags

Blog Archive

Blog Archive