Methods Of Maintaining Longboard Skateboards

Publié par Unknown samedi 19 décembre 2015

By Marci Nielsen


A number of people have nowadays resorted to moving faster within the streets of various busy cities other than the normal means of transport. The idea is to make it the process as simple as possible. Consequently, most surfers also are on the quest of feeling the speed and experience they have when doing their thing in large water bodies. As a result, of the emerging trend, there has been a constant rise and popularity of longboard skateboards.

It is widely asserted that longboards are a sister to skateboards. The assertion is derived from the appearance of these two gadgets. Longboards usually have four main parts that include the deck, truck wheels and the bearings. The difference comes in as far as the length and design is concerned. Longboards are designed for cruising and not performing tricks. Therefore, it is vital for an owner to care for his or her longboard so as to extend its longevity.

To begin with, the deck is considered to be the main part of the board. This is because is more prone to damages than any other part. The material used in is manufacturer is a ply wood. Subsequently, other varied enhancements such as use of fiberglass can be applied to enable it to be more rigid. Whenever exposed to water, the ply may crack. It is therefore recommended to dry it off as soon as possible and store in a dry place.

The next maintenance parts are the bearings. These are usually circular in appearance and are located inside the wheels o aide in rotation. The fact that the wheels make numerous rotations every now and then makes the bearings generate plenty of heat. The heat occasionally makes them to wear out. The maintenance tip is to replace them with new ones. Lubrication using grease can also prevent wearing and tearing. Bearings are available in most retail shops in Escondido CA.

The next part is the truck. Longboard trucks are designed in such a way that they are able to withstand heavy punishment. They are basically metal components whose main function is to connect the wheels to the deck. In most cases, they are made of rubber cushions. Due to continuous flexing, they are also prone to wearing out. They need to be frequently checked and replaced.

The other components are the wheels. Wheels are quite significant given that they make contact with the ground. Worn out wheels may lead to instability and in the long run, accidents are bound to occur. Maintaining he wheels involve giving them a spin once in a while. This can be done clockwise or the other way round. If errors are noticed, arrangement must be made to replace as soon as possible.

General examination of a longboard indicates that the user is concerned about his or her safety. Sporting equipment is easily susceptible to accidents, which may cause mild and severe injuries. Such people are therefore cautioned to always examine the boards immediately after use and before usage. By so doing, one is able to alleviate the chances of breaking a bone due to a mild error.

In as much as modern longboards have been made to be tough and can withstand any weather condition, frequent maintenance is always a must. People who get the most out of their boards usually adhere to the above mentioned techniques of maintenance. Furthermore, safety is of paramount importance as far as any sporting equipment is concerned.




About the Author:



0 commentaires

Enregistrer un commentaire

samedi 19 décembre 2015

Methods Of Maintaining Longboard Skateboards

Posted by Unknown 04:26, under | No comments

By Marci Nielsen


A number of people have nowadays resorted to moving faster within the streets of various busy cities other than the normal means of transport. The idea is to make it the process as simple as possible. Consequently, most surfers also are on the quest of feeling the speed and experience they have when doing their thing in large water bodies. As a result, of the emerging trend, there has been a constant rise and popularity of longboard skateboards.

It is widely asserted that longboards are a sister to skateboards. The assertion is derived from the appearance of these two gadgets. Longboards usually have four main parts that include the deck, truck wheels and the bearings. The difference comes in as far as the length and design is concerned. Longboards are designed for cruising and not performing tricks. Therefore, it is vital for an owner to care for his or her longboard so as to extend its longevity.

To begin with, the deck is considered to be the main part of the board. This is because is more prone to damages than any other part. The material used in is manufacturer is a ply wood. Subsequently, other varied enhancements such as use of fiberglass can be applied to enable it to be more rigid. Whenever exposed to water, the ply may crack. It is therefore recommended to dry it off as soon as possible and store in a dry place.

The next maintenance parts are the bearings. These are usually circular in appearance and are located inside the wheels o aide in rotation. The fact that the wheels make numerous rotations every now and then makes the bearings generate plenty of heat. The heat occasionally makes them to wear out. The maintenance tip is to replace them with new ones. Lubrication using grease can also prevent wearing and tearing. Bearings are available in most retail shops in Escondido CA.

The next part is the truck. Longboard trucks are designed in such a way that they are able to withstand heavy punishment. They are basically metal components whose main function is to connect the wheels to the deck. In most cases, they are made of rubber cushions. Due to continuous flexing, they are also prone to wearing out. They need to be frequently checked and replaced.

The other components are the wheels. Wheels are quite significant given that they make contact with the ground. Worn out wheels may lead to instability and in the long run, accidents are bound to occur. Maintaining he wheels involve giving them a spin once in a while. This can be done clockwise or the other way round. If errors are noticed, arrangement must be made to replace as soon as possible.

General examination of a longboard indicates that the user is concerned about his or her safety. Sporting equipment is easily susceptible to accidents, which may cause mild and severe injuries. Such people are therefore cautioned to always examine the boards immediately after use and before usage. By so doing, one is able to alleviate the chances of breaking a bone due to a mild error.

In as much as modern longboards have been made to be tough and can withstand any weather condition, frequent maintenance is always a must. People who get the most out of their boards usually adhere to the above mentioned techniques of maintenance. Furthermore, safety is of paramount importance as far as any sporting equipment is concerned.




About the Author:



0 commentaires:

Enregistrer un commentaire

Tags

Blog Archive

Blog Archive