Going for a bike ride is an excellent way to exercise. The strain on knees and shins caused by running can be relieved by going for a ride. Traditional bikes like ten-speeds are often the first thought of most new riders, but there has been a strong surge towards recumbent bicycles. The design is different because they allow you to sit back and enjoy the scenery. Before your first ride, there are a few differences that you need to learn.

Getting on and off these bikes is one of the first critical differences. If you don't swing your leg forward to get on or off the cycle, you stand a pretty good chance of falling over. The seat is a reclining seat so when you swing over the back, as with other bikes, you will probably hit the seat with your foot.

Adjust your seat and handlebars before you begin your first ride. This is more important on this than other bikes because you will want to be able to sit back while you ride. You need to be able to have a light touch on the handlebars and easily reach the pedals without having to lean forward for either.

Make sure you put the brakes on when you start and stop. This type of bike is prone to fall over if you don't have a good sense of control. The first few times you use the cycle will be the most important while you learn the best way to get on and off.

This cycle is not designed to stress you while you ride. With this in mind, be sure to start in a low gear and use the gears appropriately to be able to enjoy your ride. You can get great exercise without having to be a speed demon.

There is some debate on how to set your pedal before starting. Some suggest 2 o'clock but a 12 o'clock position is best for beginners. This allows you to put one foot on the pedal to get a good strong start.

Use the reclining position to ride. The seats are made for you to be in a position where you can almost feel like you're not really exercising. You can just sit back and relax. In fact, you need to look up and forward, not at the ground, while going on your ride.

Use the pedal to get started. As stated before, you should start by pushing on the pedal. Quickly move your ground foot to the other pedal to keep going. Since you are starting in a reclining position you will not have enough leverage to push from the ground to get started like you would with a ten speed.

Stopping is a coordinated effort. At first, it might seem difficult, but stopping the bike is much the same that kids do when they first learn to ride a cycle. Apply the brake, then put both feet down on the ground and as you stand up, straighten the wheels.

Enjoying the scenery and avoiding strain are two big benefits of these bikes. Once you get a couple of good starts on the cycle, you will naturally get a feel for how it works. It is different in some ways, but you will find that you ride longer and farther without tiring as much.